VG814和VG710如何进入CLI配置页面

Admin
Admin This guy is lazy,Introduction has not been set

1 People liked this article · 311 views

  • 1. 启用Telnet功能
  • 进入Web配置页面,Administration>> Management Services , 勾选Telnet 功能并点击Apply&Save 按钮。也可以启用SSH功能,登陆端口22。
  • 设备默认关闭了Telnet 及SSH登陆端口。

b1dd651f40b2641598a6cf8916761a80.png

2. 链接设备

通过控制台、SSH或Telnet登录设备。成功后会进入特权EXEC模式,提示符为 #

VG710 login: adm
Password:

********************************************************************************
Welcome to INOS console

Copyright (c)2001-2024 InHand Networks Co., Ltd.
http://www.inhandnetworks.com
--------------------------------------------------------------------------------
Model : 710
Serial Number : VF7102041000762
Firmware Version : V1.2.1.r30071
Bootloader Version : 2012.07.r238
--------------------------------------------------------------------------------
VG710#

3. 进入全局配置模式

输入 configure terminal(可简写为 conf t):

14:04:50 VG710# configure terminal 
14:04:51 VG710(config)#

4. 进入子配置模式(可选)

VG710(config)# interface vlan 1
VG710(if-vlan-1)#
Configure commands:
backup Configure backup interface
bridge-group Add the interface to bridge
crypto Encryption/Decryption commands
ddns Specify a ddns update method to the interface
description Add interface description
exit Exit current mode/console
ip Interface IP config commands
max-bandwidth Limit max bandwidth of the interface
no Unset the given argument
pppoe-client pppoe client
show Show system information
traffic Traffic control
traffic-stated Set Traffic statistic
vrrp Virtual Router Redundancy Protocol
14:05:51 VG710(if-vlan-1)#

5. 查看所有端口状态(可选)

VG710(config)# show interface
Loopback1 Link encap:Local Loopback  
inet addr:127.0.0.1 Mask:255.0.0.0
UP LOOPBACK RUNNING MTU:65536 Metric:1
RX packets:93 errors:0 dropped:0 overruns:0 frame:0
TX packets:93 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1
RX bytes:7488 (7.3 KiB) TX bytes:7488 (7.3 KiB)
Wlan1 Link encap:Ethernet HWaddr 00:18:05:14:6B:F1
inet addr:10.5.15.5 Bcast:0.0.0.0 Mask:255.255.255.0
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:6467 errors:0 dropped:0 overruns:0 frame:0
TX packets:4269 errors:6 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:6425212 (6.1 MiB) TX bytes:907945 (886.6 KiB)
Line protocol uptime:174s (0 day, 00:02:54)
Bridge 1 Link encap:Ethernet HWaddr 00:18:05:14:6B:EF
inet addr:192.168.2.1 Bcast:0.0.0.0 Mask:255.255.255.0
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:6755 errors:0 dropped:0 overruns:0 frame:0
TX packets:7609 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:1172053 (1.1 MiB) TX bytes:6756040 (6.4 MiB)
VG710(config)#

6. 保存并退出

VG710(config)# write  # 保存配置
VG710(config)# exit # 退出全局模式
VG710#




Published on 2025-03-27 14:09

Disclaimers:

This document is written by Admin Original published on 技术社区 ,The copyright belongs to the author。

Log in,More exciting content waiting for you to find,Contribute wonderful answers,Participate in comment interaction

go Sign in! No accountgoregister